• NEW Products
This section will list new products. Not every nut and bolt but the ones we think you should know about.
Kawasaki H2 & H2A Rear Brake Rod with Hardware - Chrome Plated
| 1972 H2 & 1973 H2A Includes adjuster and hardware |
Z1PN-3341
US$41.00
Kawasaki H2 & H2A Rear Brake Rod with Hardware - Zinc Plated
| 1972 H2 & 1973 H2A Includes adjuster and hardware |
Z1PN-3340
US$36.00
Kawasaki H2 & H2A Rear Turn Signal Stem Set - Short
| Complete H2 & H2A rear turn stem assemblies
Stems measure approximately 2" (50mm) from base to tip |
RD-H2S-TRN-R
US$160.00
Kawasaki H2 & H2A Rear Turn Signal Stem Set - Standard Length
| Complete H2 & H2A rear turn stem assemblies |
RD-H2L-TRN-R
US$160.00
Kawasaki H2 Engine Cover Set
| Set of 3 Polished Aluminum Engine Covers - H2 750cc Triple |
Z1PN-0935-H2
US$205.85
Kawasaki H2, H1, S1, S3 & KH Rear Reflector Dampers (set of 2)
| Set of 2 Rubber Dampers for rear shocks |
Z1PN-0815-2
US$21.40
Kawasaki H2, H1D & S Series Ignition Cover
| Polished Aluminum LH Case Cover - H2, H1D & S Series models - see detailed list |
Z1PN-0905-H2
US$113.85
Kawasaki H2, H2A & H1B - Chrome Bolt Set - Upper Steering Stem Clamp
| 8mm X 56mm bolts, washers & acorn nuts |
PM147-523
US$32.00
Kawasaki H2, H2A & H1B Steering Damper Knob & Hardware
| Damper Rod with Hardware |
Z1PN-3262-CS
US$124.20
Kawasaki H2, H2A, S1 & S2 Rear Reflector Dampers
| Set of 2 rear reflector dampers |
Z1PN-3197-2
US$19.00
Kawasaki KH & S Series Rear Fender Bracket - Chrome
| Rear fender bracket - Chrome rear fender - Long type as used on Euro spec. models |
HL-256543
US$39.50
Kawasaki KZ750 & KZ440 Carburetor Rebuild Kit
| KZ750 & KZ440 Carburetor Rebuild Kit |
MC48-1419
US$19.95
Kawasaki S1 & KH250 48T Rear Sprocket - Standard for 525 chain
| 1972-1975 S1 & 1976-1978 KH250 |
HL-047448
US$44.00
Kawasaki S1 & S2 - Upper Engine Nut & Washer Set
| Cylinder Head, Exhaust and Carburetor Nut & Washer Set |
RD-S2-TOPEND-SET
US$15.00
Kawasaki S1, KE, KD, KM, KH & G3 - Brass Carburetor Float
| Aftermarket replica carburetor float |
MC73-0866
US$23.00
Kawasaki S1, S2, S3 & KH Inner Crank Seal - Right or Left Inner
| 250, 350 and 400 triples |
SC504-305
US$19.40