Diablo Cycle :: • Parts - By Model :: • Kawasaki Triples - H1, H2, KH & S Series :: Body :: Kawasaki 1970 H1 & 1971 H1A Seat Assembly

Kawasaki 1970 H1 & 1971 H1A Seat Assembly - Complete

Fits the following models:
1970 H1 Mach III
1971 H1 Mach III
OEM style replica seat with black metal pan and mounting hardware.
Sold as a complete unit with hinges and rubber dampers.
This seat will fit on 1969-1972 models but this seat has black piping which is specific to the 1970 H1 & 1971 H1A models only. Seam on rear is stitched.
53001-066 SEAT ASSY - DUAL

53009-012-10 HINGE - FRONT
53009-013-10 HINGE - REAR
53008-006 HOOK
53012-002 SPRING
92075-023 DAMPER RUBBER DUAL SEAT
53011-001 PIN DUAL SEAT PIVOT
550D2015 PIN COTTER 2.0x15
112B0614 BOLT - UPSET 6x14
461F0600 WASHER SPRING 6mm
411B0600 WASHER PLAIN 6mm

*Note: The seat base has a small plastic square attached with 4 tabs to the underside of the seat which we assume is to replicate the pocket found on the 1972 H1B. This can be discarded if desired, as the 1970 & 1971 H1 did not have it.

hinges & mounting hardware