Fits the following models:
1972 H1B Mach III
1972 H1C Mach III
OEM style replica seat with black metal pan and mounting hardware.
Sold as a complete unit with hinges and rubber dampers.
This seat will fit on 1969-1972 models but this seat is specific to the 1972 H1B & 1972 H1C models only. The original seat had a pattern of 11 lines on the top which you will find on this seat. There was a seam on the rear of the original seat cover that is NOT present on this reproduction.
53001-012 SEAT ASSY - DUAL
53009-012-10 HINGE - FRONT
53009-013-10 HINGE - REAR
53008-006 HOOK
53012-002 SPRING
92075-023 DAMPER RUBBER DUAL SEAT
53011-001 PIN DUAL SEAT PIVOT
550D2015 PIN COTTER 2.0x15
112B0614 BOLT - UPSET 6x14
461F0600 WASHER SPRING 6mm
411B0600 WASHER PLAIN 6mm
*Note: The seat base has a small plastic square attached with 4 tabs to the underside of the seat which we assume is to replicate the pocket found on the 1972 H1B. | 
