Diablo Cycle :: • Parts - By Model :: • Kawasaki Triples - H1, H2, KH & S Series :: Body :: Kawasaki 1969 H1 Seat Assembly

Kawasaki 1969 H1 Seat Assembly - Complete

Ask a question about this product

Printable version

Fits the following models:
1969 H1 Mach III
OEM style replica seat with black metal pan and mounting hardware.
Sold as a complete unit with hinges and rubber dampers.
This seat will fit on 1969-1972 models but this seat has gold piping which is specific to the 1969 H1 only. Seam on rear is stitched.
53001-060 SEAT ASSY - DUAL

53009-012-10 HINGE - FRONT
53009-013-10 HINGE - REAR
53008-006 HOOK
53012-002 SPRING
92075-023 DAMPER RUBBER DUAL SEAT
53011-001 PIN DUAL SEAT PIVOT
550D2015 PIN COTTER 2.0x15
112B0614 BOLT - UPSET 6x14
461F0600 WASHER SPRING 6mm
411B0600 WASHER PLAIN 6mm

*Note: The seat base has a small plastic square attached with 4 tabs to the underside of the seat which we assume is to replicate the pocket found on the 1972 H1B. This can be discarded if desired, as the 1969 H1 did not have it.

hinges & mounting hardware